By - Schuette Mfg.

Knowles Model K 970M

The K970M is made for heavy-duty agricultural use where flotation is of utmost importance.  It will move heavy loads from soft fields with a minimum of draft, and can be towed and backed easier than a conventional four wheel type gear. A new and improved tandem axle assembly is now standard.  This new design feature permits operation in heavy mud without clogging.  Pivot point is 1″ off center for reduced stress on tandem axles when turning. The unit is constructed of heavy welded structural steel with a high carbon tubular steel reach.  Spindles are made of 1045 cold finished steel and are pressed in- no welding on tandem spindles.  The hubs rotate on the latest type tapered bearings.  All points of wear are equipped with renewable bushings.

GENERAL SPECIFICATIONS

Capacity: 24,000 lbs.Turning Radius: Short
Wheels: 15 x 10.00, 15 x 8.00 or 16 x 8.00Hubs: Heavy 6-Bolt
Reach: 2-7/8″ Diameter high strengthTread-width: 80″
Weight with Tires: 1405 lbs.Tongue: Fixed Length
Stakes: Heavy Pressed SteelTandem Spindles: 38″ centers
Bushings: At all points of wearFrame: Structural Steel
Tie Rods: Solid SteelTandem Axle: Wide Clearance
Wheelbase” Adjustable from 8′ to14′Spindles: Reinforced 2″ Diameter 1045 Steel Pressed fit in Tandem axle

EXTRA EQUIPMENT

TiresFlexible Bolsters
EASY HITCH TongueEASY LIFT Tongue Support
Brakes(Electric or Hydraulic)Lights
SpringsSafety Chains & Extra Long Reach 
By - Schuette Mfg.

Knowles Heavy Duty Tandem Farm Wagon Model T760A-1

The T760A-1 is designed for feed and forage box equipment, and is also ideal for sprayer and fertilizer tanks. A unique axle suspension makes the wagon flexible for rough terrain. The wheels will not lose their alignment, even when heavily loaded and operated in muddy fields. The all steel welded frame is made of heavy 6″ channel, rigidly cross braced and reinforced at all points. Spindles are welded to a heavy walking beam, which is equipped with an inner angle brace. The oscillating shaft is 1-¾” in diameter and is bearing mounted. Full 2″ diameter spindles and heavy duty 6-bolt hubs are used on the T760A. 15 x 10.00 or 16 x 8.00 drop center wheels are standard equipment.

GENERAL SPECIFICATIONS

Capacity: 20,000 lbs.Spindles: 2″ Alloy Steel
Length: 17 feetHitch: Clevis Type
Tread-width: 76 “Jack: Hinged Type
Frame Width: 42 “Wheels: 15″ or 16″ DC
Bearings: High Speed TaperedWeight (With Tires) – 1221 lbs.
Hubs: Heavy 6-Bolt

EXTRA EQUIPMENT

BrakesTires – 10.00 x 15 8-ply
12.5L x 15 8-ply
12.5L x 16 8-ply
Hitch – Ball Type or Pintle Eye
By - Schuette Mfg.

Knowles Model T1168M 6-Wheel Tandem

Study the new and improved T1168M tandem farm wagon.  The main frame is constructed of heavy structural steel, rigidly braced and gusseted at all stress points.   Boxed rectangular walking beams assure straight trailing and maximum strength.   Solid steel pivot shafts oscillate on bronze bushings.  The T1168M is an ideal running gear for use under forage boxes and other heavy duty equipment.

GENERAL SPECIFICATIONS

Capacity: 33,000 lbs.Hinge Bolt: 1-1/8″ Diameter
Tread-width: 80″Bushings: At All Wear Points
Wheels: 15 x 10, 16 x 10, 16.1 x 11, or 16.5 x 8.25 DC 8-BoltPivot Shafts: 1-3/4″ CR Round Steel
Spindles – 2-1/4″ DiameterRear Tow Hitch: Standard Equipment
Hub Bearings: Tapered Roller – 1.7807″ and 1.2495″ I.D.Turning Radius: 55 degrees
Bolster Stakes: 42″Wheelbase: Adjustable from 7′ to 13′
Tandem Axles: Flexible Type – 44″ CentersTongue: Rectangular EASY HITCH
Reach Tube: 3-1/2″ ODTie Rods: 1″ Diameter
Steering Truck TypeBolster: Flexible Front
King Pins: 1-3/4″ Diameter Heat TreatedWeight (With Tires): 1989 lbs.
Hubs: Heavy Duty 8-Bolt

EXTRA EQUIPMENT

2 or 4 Wheel Brakes: Inertia-HydraulicEASY LIFT Tongue Support
EASY RIDE Spring Stake AssembliesSafety Chains, Bolster Blocks
16.1 x 14″ and 20″ Drop Center WheelsTires, Lights
Extra Long Reach
By - Schuette Mfg.

Knowles Super Tandem 6-Wheel Wagon Model TB1800

This model is designed for the large farming operation.  A flexible rear axle assembly equally divides the load on all tires.  This feature gives improved flotation with maximum load.  The TB 1800 is made of heavy structural steel rigidly reinforced at all stress points.   The front axle is equipped with a heavy-duty rocking bolster.  Steering mechanism is truck-type with heavy steel trunnions, cold finished king pins, and thrust bearings.  All points of wear have renewable bushings, and the hubs rotate on oversized tapered bearings.

GENERAL SPECIFICATIONS

**Capacity: 36,000 lbs.Bolster Pins: 1-5/8″ Diameter
Tread-width: 80″King Pins: 1-3/4″ Diameter
Spindles: 2-3/4″ DiameterBushings: At All Wear Points
Hubs: 8-Bolt with Tapered BearingsTie Rods: 1-1/8″ Solid Steel
Wheel Bearings: Tapered Roller 2.1654″ and 1.6250″ IDStakes: Adjustable 38″ – 42″
Wheels: 16.1 x 11, 16.1 x 14, 16.5 x 8.25, or 20 x 8 DC*Wheelbase: Adjustable 8′ – 16′
Tongue: Rectangular EXTEND-O-MATIC with EASY LIFT Tongue SupportTandem Axles: Walking Beam Type
Reach: 4″ DiameterFrame: Structural Steel
Bolster: Flexible FrontWeight with Tires: 2543 lbs.

** When Equipped with Rated Tires

  * Special Reach Lengths Available

By - Schuette Mfg.

Knowles Super Tandem 6-Wheel Wagon Model TB450-1

This model is designed for large farming operations and construction use.  A flexible rear axle assembly equally divides the load on all tires.  This feature gives improved flotation with maximum load.  The TB450-1 is made of heavy structural steel rigidly reinforced at all stress points.   The front axle is equipped with a heavy-duty rocking bolster.  The truck-type steering mechanism has heavy steel trunnions, cold finished king pins, and thrust bearings.  All points of wear have renewable bushings, and the hubs rotate on oversized tapered bearings.

GENERAL SPECIFICATIONS

**Capacity: 45,000 lbs.King Pins: 1-3/4″ Diameter
Tread-width: 87″Bushings: At All Wear Points
Spindles: 3″ DiameterTie Rods: 1-1/4″ Solid Steel
Hubs: Heavy Duty 8-BoltStakes: Adjustable 42″ to 44″
Wheel Bearings: Tapered Roller 2.250″ and 1.625″ I.D.Wheelbase: Adjustable 10′ to 15′
Wheels: 16.1 x 16 DC 8-BoltPivot Shaft: 2-3/4″ CR Round Steel
Reach: 4″ DiameterTandem Axles: Walking Beam Type
Bolster: Flexible FrontFrame: 8″ Boxed Channel
Bolster Pins: 1-5/8″ Diameter Heat TreatedRear Tow Hitch: Standard Equipment
Tongue: 82″ Tubular Steel Fixed Length or Rectangular Extendible with EASY LIFTWeight (Less Tires): 3,012 lbs.

**When Equipped with Properly Rated Tires

EXTRA EQUIPMENT

4-Wheel Inertia-Hydraulic BrakesPintle Eye Hitch
Tires 19L x 16.1 or 21.5 x 16.1Bolster Blocks
16.1 x 18 DC or 22.5 x 13 Truck WheelsExtra Long Reach
Safety ChainsLights